Compliance West USA MegaPulse DF-1A.2, Surge Tester DF-1 Fig. A.2 waveform with truncation, USB TestMinder Surge Tester and IGBT switch
The DF-1P Isolation surge Tester is designed to generate the waveform described in AAMI DF-1, Figure A.2., for the Lead Connector electrical isolation test in AAMI DF-1, Annex A.
The test can be set to automatically conduct the first 490 cycles (500 ± 50 as shown in Standard) of the test, and then stop testing to allow laboratory personnel monitor the last 10 cycles in accordance with the Standard. Voltage and current BNC outputs make waveform analysis convenient.
- Generates the waveform required for the Current carrying Test, AAMI DF-1, Appendix B, and described in AAMI DF-1, Figure B.2.
- Designed with operator safety in mind: Set up the EUT to the right and behind the tester, and a right-handed operator will find himself standing to the left of the tester, allowing maximum separation.
- Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse DF-1P, allowing easy sanity checks and proof to visiting agency engineers of test setups.
- BNC Oscilloscope outputs allows quick connection and easy evaluation of voltage and current output waveforms.
- Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors.
- TestMinder computer control allows automation of the required 490 cycles, then the operator can conduct the last 10 cycles in which the current waveform must be monitored. (Waveform capture is not provided).
- 1-year calibration cycle.
- All test leads included.
- 1 year warranty
- Current Duration: 18 mS
- Meter accuracy: ±5 %
- Operation temperature: 15-40 °C
- Relativity humidity range: 0-90 % Non condensing
- Standards: AAMI DF-1 App B, Figure B.2
- Storage: No
- Warranty: 1 Year
- Calibration: 1 year
- ECCN number: 3B992
- HTS/Schedule B: 9030.39.0100
- Product Dimensions: 17 w x 17 L x 6 H
