- Output NPN frequency 757 pulses/gal, NPT/BSP 1, Sensor I.D. 3/4
- No Moving Parts
- No Flow Obstructions
- Maintenance-Free
- Fast Response Time (<, 500 ms)
- Minimal Straight Pipe Requirements
- Electrodes and Process Connection: Stainless steel 316 TI
- Measuring Pipe: PEEK-GF30
- Gasket: EPDM
- Housing: Cast Aluminum
- Accuracy: ±1.5% of reading ±0.3% range
- Repeatability: 1%
- Minimum Conductivity: 50 µs/cm
- Maximum Liquid Temperature: 90°C (194°F)
- Ambient Temperature: 5 to 70°C (41 to 158°F)
- Maximum Pressure: 16 bar (232 psi)
- Flow Indication: LED green, flow proportional blinking
- Frequency: Square wave signal NPN, internal pull-up resistor 2 kΩ pulse duty ratio 50:50
- Signal Current Maximum: 20 mA, current limited
- Response Time:Electrical Connection: Plug connector M12 x 1
- Power Supply: 24 Vdc ±10%
- Current Consumption: Maximum 150 mA
- Electrical Protection: Measures short-circuit proof (up to 30V) and polarity protection (up to -30V)
- Protection Class: NEMA 4X (IP65)
- Flow Range: 5 to 250 LPM (1.32 to 66 GPM)
- Analog Output Signal (“-A” Models) 4 to 20 mA (0 to Full Scale):
- Current Limitation: 26 mA approx.
- Maximum Load: 250 Ω to GND
Shop By Department
- Calibration Instruments
- Dimensional Measuring Tools
- Electrical Test Instruments
- Environmental Testing
- Power Quality
- Pressure Measurement
- Preventative/Maintenance
- Process Instruments
- Recorders/Data Loggers
- Scales and Balances
- Temperature Measurement
- Torque
- Oscilloscopes
- Power Supplies
- Spectrum Analyzers
